New Water Service Process

This page is intended for homeowners, contractors, and developers requesting new water service for a home, duplex, triplex, or Accessory Dwelling Unit (ADU) within Avion Water's service territory.

Download page as PDF
Meter Size Maximum Flow
58" 20 GPM
34" 30 GPM
1" 50 GPM

1. Determine Your Water Service Requirements

Avion Water requires each dwelling, duplex unit, triplex unit, and/or ADU to have its own individual water service at the street.

Avion offers three residential meter sizes:

Residential properties with fewer than four rentable units are not permitted to have meters larger than 1 inch.

Flow rates are measured at the meter, before water passes through the backflow prevention assembly (BPA). Actual flow may decrease due to the BPA, property elevation, and/or the length of the customer service line.

Depending on city and/or county requirements, a fire suppression system and 1-inch meter may be required. Consult your contractor or the company performing the installation to determine the specific requirements for your project. The customer, contractor, or developer is responsible for the installation, maintenance, repair, and replacement of pressure reducing valves (PRVs), including those required for fire suppression systems or meters larger than 3/4 inch.

2. Submit Your Application

All submissions must include copies of the property's site plan and building floor plan, regardless of the scope of the project.

Your site plan must clearly show the location of all proposed dwellings and identify the proposed water meter location(s), existing and proposed.

Submit the completed Meter Installation Request Form and supporting documents by email to development@avionwater.com or use the “Meter Installation Request Form Upload” tool, below.

3. Avion Water Review and Approval

Once your application and supporting documents are submitted, Avion Water will review the proposed development and water service locations. If approved, your site plan will be stamped. (Please allow 5 – 7 business days)

If a Willing and Able to Serve Letter is required for permitting, Avion Water will issue one after the site plan has been approved.

  • For projects within the City of Bend or Deschutes County, provide the stamped site plan and Willing and Able to Serve Letter to the appropriate permitting agency.

  • For projects in Crook County, the county may provide a separate packet that must be completed and signed by Avion Water. The complete packet, including site and floor plans, must be submitted to Avion for signature.

4. Applicable Fees and Charges

Any new water services or development being connected to the Avion system are subject to applicable System Development Charges (SDCs). SDCs are one-time fees, paid by the property owner or developer that help fund necessary system improvements and infrastructure upgrades to ensure Avion can accommodate increased demand and continue to provide reliable water service as the community grows.

System Development Charges (SDCs) are determined by meter size and assessed in accordance with Avion Water’s current tariff approved by the Oregon Public Utility Commission (OPUC).

Meter Size SDC Fee
58" $3,650.00
34" $5,475.00
1" $9,125.00
112" $18,250.00
2" $29,500.00
3" $54,750.00
4" $91,250.00
6" $182,500.00
8" $292,000.00
4" or smaller fire $7,300
6" or smaller fire $14,600

System Development Charges

Fire Service Size SDC Fee
4-inch or smaller $7,300.00
6-inch or smaller $14,600.00

Fire Service SDCs

Fire Service Lines by Size Monthly Rate
4-inch and smaller supply $41.78
6-inch supply $91.91
8-inch supply $158.75
10-inch supply $250.65
12-inch supply $359.27
Per hydrant per month $22.60

Monthly Fire Service Rates

Water Meter Installation Costs

In addition to applicable SDCs, customers are responsible for meter installation costs. Labor costs are set, and material charges are billed at cost. All installation cost calculations are estimates. If actual costs exceed the estimate, additional charges will be billed to the account and paid on the next statement. If actual costs are less than the estimate, the remaining balance will be credited to the account.

Credits remain on the account until used by ongoing monthly charges or until the financially responsible person or company no longer has any active accounts with Avion Water. Refer to the Avion Water Refund and Credit Policy for additional information.

5. Meter Installation and Scheduling

Please plan accordingly. Avion Water requests at least six weeks between payment of estimated meter installation costs and the actual meter installation.

Between November and March, meter installations will not be completed until the structure is partially weatherproofed. Once the meter and Double Check Valve Assembly (DCVA) are installed, the financially responsible person may be charged for damage, water loss, labor, and/or replacement if freezing temperatures cause either device to freeze.

6. Water Service and Ongoing Responsibilities

Once the meter is installed, ongoing monthly charges begin and you become financially responsible for the requested water service and agree to the terms and conditions outlined in Avion Water's service agreement.

Monthly charges begin upon meter installation which will include the monthly base rate, water commodity charges, and any other applicable charges associated with the lot.

Please see General Information page under the Customer information tab.

Meter Size Monthly Base Rate
58" $29.47
34" $44.21
1" $73.68
112" $147.35
2" $235.76
3" $442.05
4" $736.76
6" $1,473.52
8" $2,357.62

Domestic Base Rates

Number of Units/Unit of Measurement Commodity Rate
100 Cubic Feet $1.22

Commodity Rate

Number of Units/Unit of Measurement Commodity Adjustment Rate
100 Cubic Feet $0.01

Commodity Adjustment Rate

For additional development and engineering information, please refer to the Development Information tab on the Avion website.